Welcome to the official website of Shanghai Sutian Plastic Mould Co., Ltd.!

National Service Hotline:


您當前的位置 : Home >> Products >> Auto parts
Professional auto parts injection processing

Professional auto parts injection processing

  • Category:Auto parts
  • Views:
  • Release date:2019-12-04
  • Description

In the mold manufacturers, the shaft head cover mold manufacturers customize, using various metal materials and non-metal materials, mainly carbon steel, alloy steel, cast iron, hard alloy, low melting point alloy, zinc-based alloy, aluminum bronze, synthetic resin , Polyurethane rubber, plastic, laminate, etc. The mold manufacturing materials are required to have the characteristics of high hardness, high strength, high wear resistance, good toughness, high hardenability, non-deformation, and difficult cracking during quenching.

Pay attention to the orientation of the mold injection device. On the general drawing of the mold, the hoisting direction is generally the direction of the front view of the pattern, and it is hoisted according to the general drawing. If there is no clear indication in the design or no clear rules for other reasons, the choice of the direction of the mold injection device follows the following criteria.

① When there is a structure that slides sideways, try to make the movement direction parallel to the degree direction. When opening downward, do not place it in the upward opening direction. Effectively maintain the safe reset of the side slider to avoid hitting the heart.

② When the difference between the injection length and the width of the mold is large, the longer side should be parallel to the degree direction as much as possible.

③ When the mold is equipped with a hydraulic oil connector, a pneumatic connector, and a hot runner component wiring board, it should be rotated on the non-operation side as much as possible to facilitate operation.

Recently Viewed:

Related Products

Related News

Shanghai Sutian Plastic Mould Co., Ltd.(R & D Center)

Suzhou Longyu Phaeton Auto Parts Co., Ltd. (production base)

Contact person: General Teng

Company phone: 021-67890578

Company address: No. 8 Workshop, No. 601 Xiangmin Road, Chedun Town, Songjiang District, Shanghai


 Follow the official WeChat Follow mobile stations
Copyright ? Shanghai Sutian Plastic Mould Co., Ltd. All rights reserved record number:滬ICP備19039722號